When living in a home, things can get broken or worn down. One of the most common things that needs replacement in a living space is the drywall. Drywall is very easy to damage as just a little bit of weight applied to drywall can result in holes, scratches, and even structural breaks such as folds and cracks. So what is a person to do when these types of things happen? The answer is not as complicated as you think as replacing drywall is very easy. If you life in Portland, follow these tips when repairing drywall in Portland.
Before you can repair anything, you need to first of all get the drywall in Portland to be able to fix the existing drywall. Make sure to do some research when looking for drywall in Portland to make sure that you get the proper amount at the best price. A good rule of thumb is to call around at a few places to find the best deal. Once you have locked down where to get the Kings Drywall, the next thing to do is to prep the repair area for the drywall replacement.
If there is a hole in the wall, the best thing to do is to cut out a square the surround the hole and that goes from stud to stud in the walls. This makes repairing very easy as you will just have to replace the panel and then just mud around the edges. The most important thing about mudding is to use fresh mud with a new trowel. Trowels have the tendency to rust, so make sure use a new one so that you don’t get weird lines in the mudding work.
The next most important thing about drywall replacement is to sand the area once it dries. Sanding is the key to a seamless looking drywall repair. The best rule of thumb is to sand, sand again, and then sand the area a third time before re-applying more mud to the area. The key is that you want to not be able to see edges or abrupt rising on the wall where the new piece of drywall was installed. Once you get the area sanded and smooth, the next thing to do is to prime the area. The reason that priming is so important is because drywall mud sucks up paint like crazy.
To get a consistent look, make sure to prime the area first. As you can see, performing drywall Portland repairs can be easy if you just pay attention to how smooth things are after sanding.